Pre-Mask Tape

Pre-Mask Tape

  • Ultra high grade paper with high tack adhesive.
  • Includes superior release liner adhesion to prevent wrinkling, curling and edge lifting.
  • Protects engraving when cutting out shapes.
Part No. Description
9PR-MASK-1 1-1/4” x 100 yards
9PR-MASK-2 2-1/4” x 100 yards
9PR-MASK-3 3-1/4” x 100 yards
9PR-MASK-4 4-1/4" x 100 yards
9PR-MASK-6 6" x 100 yards
9PR-MASK-12 12" x 100 yards

 

3M Adhesive Transfer

  • Long-lasting adhesive provides a solid, permanent bond.
  • Adhesive layer is protected by a coated liner to allow easy release.
Part No. Description
99A-467-S12 12" x 24" sheets
99A-467-S36 24" x 36" sheets
99A-467 12" x 180 yard roll
99A-468 12" x 180 yard roll

 

To order pre-applied to plastic or metal sheeting:

Part No. Size
ADH-010 12" x 24"
ADH-020 24" x 24"
ADH-030 24" x 48"

 

Adhesive Remover (#99A-REM)

  • Removes most types of glue and adhesives left by decals, tapes and graphics
  • Simply Spray and leave on for 60 seconds (no more than 120) then lightly scrap off glue residue
  • Rinse area with water
  • Use in well ventilated area
  • 1 Quart Includes Spray Nozzle

Magic Peel

With one swipe, Magic Peel lifts an edge of protective plastic allowing you to easily grab the plastic and pull it off.

Item #MSK-PEEL

  • Works on most materials covered with protective plastic masking such as aluminum, brass, engravable plastic and plexiglass.
  • Magic Peel won't scratch or scuff highly polished surfaces.

 

Double-sided Supertuff Tape

  • High performance tape.
  • Long lasting, all-weather acrylic adhesive holds up in extreme cold, heat and humidity.
Part No. - Description Part No. - Description
99T-025 - 1/4" x 55 meters 99T-150 - 1-1/2" x 55 meters
99T-038 - 3/8" x 55 meters 99T-200 - 2" x 55 meters
99T-050 - 1/2" x 55 meters 99T-050-36 - 1/2" x 36 yards
99T-075 - 3/4" x 55 meters 99T-075-36 - 3/4" x 36 yards
99T-010 - 1" x 55 meters 99T-010-36 - 1" x 36 yards

 

Double-Sided Tape

  • Economical paper lined, suitable for general applications.
  • Rubber based adhesive.
Part No. - Description Part No. - Description Part No. - Description
99P-050 - 1/2" x 33 meters 99P-075 - 3/4" x 33 meters 99P-010 - 1" x 33 meters

 

Laser Tape

  • Laser Tape allows you to use a laser engraving machine in correlation with a sandblast cabinet.
  • Laser Tape creates low cost stencils while allowing you to achieve the finished look of sandblast engraving.
Description Item Size

Rolls

LAS-TAP-625 6" x 25'
LAS-TAP-400 4" x 100'
LAS-TAP-600 6" x 100'

Strips

LAS-TAP-406 4" x 6"

Laser Mask Blazer Orange

Laser Mask Blazer Orange is a sandblastable laser mask designed to create stencils for the high end corporate, promotional products and giftware industries creating beautifully etched glass and crystal. Film turns slightly darker when in contact with substrate, allowing you to see if areas are not making good contact.

  • Adhesive does not leave residue on the substrate. Easy dry peel.
  • More durable allowing for a deeper blast, making it great for colour filling.
  • Stretchy enough to wrap but maintains its shape when wrapped.
  • Does not stain substrates.
  • Available in 6” and 12” widths.
Item Size Description

Rolls

LAS-TAP6-625 6” x 25 Ft.
LAS-TAP6-600 6” x 100 Ft.
LAS-TAP6-120 12” x 100 Ft.

Strips

LAS-TAP6-406 4” x 6”